whether the Ultra-Sonic Inspection method that?

NDT is one of the many methods used to detect the presence of discontinuities (disabled) deep, surface defects, defects near the surface (sub-surface) of equipment made of metal or alloy. These defects can be cracks (crack), disability gases, penetration is not perfect. In the welding slag inclusions, and others. The working principle is to utilize ultrasonic examination of the wave propagation of ultra-sonic transmitter released by the work piece and then the wave behind it was captured by a receiver (receiver). Received waves can be measured, the intensity, time propagation or resonance caused. So in general ultra-sonic inspection is based on differences in the intensity of the received wave, the difference in the intensity and propagation time and the difference resonance. Ultra Sonic can be used for various examinations.

Among others: 
-Detecting the presence of defects in materials.
-Measure the thickness of the material.
-Studying the structure of the material.
-Evaluation of the manufacturing process.

System used in the examination:
Contact testing 
Tests carried out by directly attaching transducer specimen surface.
Immersion testing 
Examination carried out by dipping the specimen and the transducer into the water bath.

Things that affect the inspection process:
Surface 
On an uneven surface specimen reflection will occur on the surface, so the examination is less to get maximum results.
The shape and location of defects.
In examining the shape and location of defects in test specimens that will be very influential on the outcome disability checks because not all easily identified.

sumber : letheg

More about → whether the Ultra-Sonic Inspection method that?

How to make Liquid Penetrant Inspection

The examinations were used to detect surface defects on porous solids are not porous. Defects that occur may arise because the manufacturing process or because of fatigue (fatigue) on the object that has been in use long enough. Cracks in investigating the cracks on the surface, and can not detect defects in the surface or near surface. This method is very effective and efficient use in the examination without damage, while relatively less expensive. The detection of cracks in this way does not depend on the size, shape, material structure, composition, and direction of cracks. Because the liquid penetrant can seep into the test object. This absorption occurs because there is a capillary power (low surface tension). His usage is not limited to ferrous metals and non ferrous metals, but can also be used in ceramics, plastic, glass and other objects of powder metallurgical process.

The liquid penetrant process following the steps below:
-Prepare the surface, in the sense of specimen surface must be clean and dry.
-Penetration, sprays penetrant on the surface of the specimen and allowed to stand for about 10 minutes for penetrant to enter into the cracks.
-Cleaning, this is done with the wash penetrant from the surface of the specimen carefully, and tries to clean the same direction.
-Developer, the developer material is sprayed onto the specimen surface so as penetrant enters the cracks will be lifted to the surface.
-Inspection, the observation specimen after the spray penetrant and will appear on specimen defects or cracks. Checks can be carried out under sufficient light or using ultraviolet light.

sumber : letheg

More about → How to make Liquid Penetrant Inspection

Magnetic particle inspection - for basic

A way of knowing the existence of cracks or defects that exist on the surface (surface or sub surface discontinuities) in ferromagnetic materials. The working principle of this test is based on the nature of ferromagnetic objects that will give the poles of a magnet if the object is in the magnetization, the magnetic pole that will cause the flow of the magnetic field from North Pole to South Pole. If there are defects in the test object such defects will cause a new magnetic field, if the defect is located perpendicular to the direction of the magnetic field.

The advantages of this method include:
-Can detect very small defects.
-Detecting defects on complex objects.
-To examine surface and subsurface defects.
Can check-ring-shaped objects and pipes.
-Portable.

Disadvantages of this method include:
-The object is examined only ferromagnetic objects.
-Requires an electrical current.
-For large test objects in great need of a yoke as well.

source : letheg

More about → Magnetic particle inspection - for basic